These are an offshoot of 3 Legged Link Brackets...... you will see the simularities. These brackets were made to eliminate the single shear of shock mounting posts found on so many vehicles (Blazers, Land Cruisers, and lots of different Jeep models). With these you can mount 1 1/4", 1 1/2", or 1 3/4" eye air shocks, standard shocks, or coilover shocks, the second tab is a floater that you decide where it needs to be. It also has a "floor" for additional protection and rigidity and the floor has 2 drain holes so you don't collect anything. It is designed to mount on either the leading or trailing edge of the axle tube so you can adjust your WB and keep the shock as low & as long as possible at the same time. They are also real handy when fitting everything on the front axle on a linked front end. With wider shocks, weld the nut to the floating tab so you can get at it. Welding required.

Designed to be the fastest and easiest to mount.

All are .25" (1/4) HR P&O plate steel.

Sold in pairs.
1 pair of brackets replace 4 single tabs.