This is a simple disk brake adapter for the 95 1/2 or newer Toyota Tacoma, designed for use with Tacoma front calipers. Perfect to do while doing that SAS but before you throw away those expensive calipers and rotors from the IFS front. GM brakes were designed for the front of a 5500lb + vehicle, so why would you want such a strong brake on the REAR of a light truck? Ok, I can agree with the front, but just use a late model Cruiser brake up front, the rear SHOULD be weaker than the front. These are bent to the correct profile of the Tacoma Caliper. You will need to either reduce the inside of the rotor or the outside edge of the axle flange end and the cost to do that should be less that the custom hose set to go from Toy to GM calipers. You will also need to trim the dust shield to fit. These are made of A50 steel plate and are 3/8" thick.

Sold in pairs.